Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Here's where you can discuss everything you have, or want but haven't got...

Moderator: Moderators

Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby AxisOfOil on Sun Jan 24, 2010 4:54 pm

Alright guys.
First impressions:
It's heavy and polished to a mirror finish. It weights about 1.5x as much as the prometheus it's being tested against. The crown is neatly cut and very deep, almost 2x as deep as the prometheus. The hopup cutout is tapered nicely from outside to inside... this should allow my bucking to flex more naturally and will probably increase life of buckings significantly. It came in a rigid plastic tube about 2x the diameter of the barrel. There was no machining oil or shavings or dirt inside the barrel whatsoever, and it looks to be polished internally as well as the prometheus.


I chronoed them with:


Chrono Results:
KA SR16 - Duracon piston head, sp130, spring guide, all that stuff. G&G bucking, h-nub, hop-up dial all the way off.
G&G .25g bb's, non-bio. 5 shots each barrel.

Prommy - Average of 5 - 416.6, highest 418.0, lowest 415.8.
Masamune - Average of 5 - 423.6, highest 425.6, lowest 420.4.
Slight increase, nothing to write home about though. It seems to be slightly less consistent though.


50ft Accuracy Results:
20 shots each (G&G .25g non-bios, with a broken-in, but not worn out, G&G green bucking, fired after adjusting the hopup for a level flight. King Arms stock hop-up unit, fully upgraded gearbox for the velocity results listed above in 'chrono results'). Indoors, level shooting from a seated bench position with a bipod and supported pistol grip.

The airsoft GI 6.01 is notably better in that over 60% of the shots were within a 1" circle, and the overall spread was smaller by a fair margin. The Prometheus barrel showed a large number of shots in a 2" circle, with a fairly even distribution across it's overall spread.
Airsoft GI 6.01
1.75"x2.5" grouping
Image

Prometheus 6.03
2.5"x3" grouping
Image

Well, I've officially decided. The Airsoft GI Masamune Barrel is more consistent and accurate than the prometheus, by a largely noticable difference.

First-shot hits over 70% of the time at or near 250feet. Sorry no more scientific evidence, but my old prometheus has found a new home in another gun.

For nearly $20 less than a prometheus, an AirsoftGI 6.01 outperformed in every category. Cost, consistency (density of main spread), accuracy(size of total spread), and velocity.
Last edited by AxisOfOil on Fri Feb 05, 2010 2:58 am, edited 3 times in total.
AxisOfOil
Sergeant
 
Posts: 226
Joined: Mon Aug 31, 2009 11:54 pm
Location: Prescott, Arizona

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby T3hl33tn00b on Sun Jan 24, 2010 9:01 pm

Good writeup, informational as well! A+
Image
Image
User avatar
T3hl33tn00b
Master Sergeant
 
Posts: 369
Joined: Fri Oct 31, 2008 9:19 am
Location: Oro Valley, AZ

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby Buffalo on Mon Feb 01, 2010 2:19 pm

God, I love engineers. Thanks for the info! I'll be ordering mine soon. It should be a nice addition to my DMR, especially considering I'll be replacing my Madbull Python TB barrel.
Buffalo
Buffalo
TAC Secretary
 
Posts: 118
Joined: Tue Jan 13, 2009 3:23 pm

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby AxisOfOil on Mon Feb 01, 2010 2:52 pm

I shoulda updated this already... its field tested as significantly more accurate than the prometheus. Added at least an extra 50 feet to my 90% hit range. Buffalo, you saw this in action over the weekend. :)

Grouping pic links un-brokenified
AxisOfOil
Sergeant
 
Posts: 226
Joined: Mon Aug 31, 2009 11:54 pm
Location: Prescott, Arizona

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby Savage on Sat Feb 06, 2010 1:22 pm

So, is this barrel rifled, textured in any way?
PRAISE TO THE HOLY PROPHET CLANCY
Facial rugs may increase combat effectiveness?
User avatar
Savage
Master Sergeant
 
Posts: 468
Joined: Wed Feb 18, 2009 4:30 pm
Location: ... Yes.

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby AxisOfOil on Sat Feb 06, 2010 4:45 pm

Savage wrote:So, is this barrel rifled, textured in any way?


Nope, it's just a 6.01 smoothbore. As far as texture, it's inside and out a mirror finish.
AxisOfOil
Sergeant
 
Posts: 226
Joined: Mon Aug 31, 2009 11:54 pm
Location: Prescott, Arizona

Re: Airsoft GI Brand 6.01 Inner Barrel (Masamune)

Postby KileyHAZ on Mon Feb 08, 2010 6:23 am

I echo bufflao in thanking you for backed evidence. Great write up!
"If everyone is thinking alike, someone isn't thinking"
Image
User avatar
KileyHAZ
Executive Advisor
 
Posts: 1551
Joined: Fri Oct 10, 2008 11:14 am
Location: Red Rock AZ


Return to Guns and Gear

Who is online

Users browsing this forum: No registered users and 1 guest