Upgrades to both sniper and MP5A5

[dorado fever]

hey everyone was looking at getting my bolt action Well L96 upgraded so it's:
1. fps is just at 550fps with .20's, (I regularily use .28 gram)
2.it is freakishly accurate (as much as an airsoft can be anyways)
3. right now it's pretty quite and would like to keep it that way but not a necessity if perfomance is lost, besides 1 shot=1 kill right?
4. total upgrades for this gun at most under $120

and was wanting to know what upgrades i should get, already was told by an airsoft specailist with DP that to get the fps i wanted get a M150 spring... other than that any help on that...


Secondly i would like to upgrade my echo 1 task force MP5A5.
Already planning on getting a Li-Poly battery, but any other suggestions for:
1. Responsiveness
2. fps already at around 370-400 would like it as high as itcan while still being able to use it at DP (don't know fps restrictions of the top of my head)
3. High ROF
4.accuracy
5. price range (just for MP5) max $120 not including Li Po battery



thanks for any help you can provide!

[Gills]

i dont know the internals about spring snipers that much. but i do not think that a normal aeg spring will fit in a spring sniper. i remember that sniper sprigns were extremly long. you might need a spring sniper upgrade kit. ive seen those with the longer spring and upgraded piston designed for spring snipers.

your mp5, there are only so many upgrades you can do.

You can put in a madbul 6.03 tight bore barrel, new compression set, and new hop up bucking+spacer.
if your looking for distance, that will be the really only things you can do. if you want more speed, you would want a new battery. I would recomend a 10.8v for speed, those usualy only come in nuncuck,large and crane stock types. not many small type 10.8s. yuo can put a lipo. those do come alot smaller. if you go with a lipo, your going to have Heavy repairs.

here is a list of what you cna start off with with your mp5:

here is a catalog of barrels. i do not know your length but her are prices:
http://www.airsoftgi.com/index.php?cPat ... natbnhu532

I Really like this piston/cylender head set. Very good for the price. it is not a double o ring cylender head, but works very well for the price.
http://www.airsoftgi.com/product_info.p ... ts_id=2965

Then a hop up/ spacer set runs from 6-10 bucks, almost any hard bucking will be good for you. can be purchased from anywhere/

[NHtucsonaz]

3. High ROF

i added a G&P M120 Ultra High Speed Motor from asgi (its i think 45$) in my ics mp5 and it really makes my gun rip and all i got is an 8.4v

[cpt_wonton2]

for the sniper you need a new cylinder, sears, and an edgi barrel, also use this nub http://www.airsoftpost.com/shredders-co ... 31599.html
you will also need a zero-trigger to pull ur spring.