Large Type Butterfly Battery into Crane Stock

[Crono0001]

I recently bought the Intellect 3600 mAh 9.6V Butterfly for my rifle:

http://www.airsoftpost.com/product_info ... s_id=29557

However, this battery is slightly larger than my current one, and won't fit into the crane stock
... Well... it fits, but it's very very tight, and the battery is longer than the stock itself.

So I was wondering if someone knew of a crane stock that could hold this battery, because I'd love to use it.

[ryukensfj]

You might need to get a full stock in order to fit that large of a battery. Other than that, not much to do other than putting the battery on the outside

http://www.airsoftpost.com/product_info ... s_id=30713
http://www.airsoftpost.com/product_info ... s_id=28751

[Crono0001]

I'm thinking of taking a cell off of each strand, rewiring them in series, and putting the two down the middle of the stock. I think it should work out fine, I'll let you guys know how it goes.

[SinfulPain]

Have you tried rotating the new battery some? With my home-made battery pack, it will only fit in 1 way.

I can take a few pics if it will help you out.

~Brian