GAS GUN Issues
Posted: Mon Oct 10, 2011 6:33 pmI worked on M9s M92 and 1911s alot and for the life of me I cannot figure out what is wrong with both of mine they recently started to act up and I cannot fix it help me.
TucsonAirsoftCoalition.com
Tucson Airsoft Coalition and Community Forum
http://tucsonairsoftcoalition.com/forum/
GAS GUN Issues
http://tucsonairsoftcoalition.com/forum/viewtopic.php?f=62&t=3329
Page 1 of 1
Posted: Mon Oct 10, 2011 6:33 pmRe: GAS GUN Issues
Posted: Thu Oct 13, 2011 7:17 amahhhhhhhhhhhhhhhhhhhhhhhhhhh A bit more info!
Re: GAS GUN Issues
Posted: Thu Oct 13, 2011 6:27 pm1911 my 1911 upon further inspection on the magazine the notch that the magaizine locks in place at is bent slightly when i push up on the magazine the gun works
M92 on the gun it seem like the recoil is weak and it barly cyles a bb
M92 on the gun it seem like the recoil is weak and it barly cyles a bb
Re: GAS GUN Issues
Posted: Fri Oct 14, 2011 5:22 pmOn the m92, I would check on the strength of the internal hammer. (The one that strikes the plate on the rear of the mag). The mag's gas release is based on how hard that little pin is struck. Not hitting hard, does not release enough gas to properly cycle.
Also, I would check the gas seal on the mag, you may be leaky.
Also, I would check the gas seal on the mag, you may be leaky.