Page 1 of 3
VFC E series M16 upgrade
Posted:
Mon Nov 21, 2011 3:16 pmby THKInternational
Hey I wated to get air seals on my VFC repaired ID alos like To tune up my gun to handel my m120 Spring. I just need an estimate on how much that would cost me. I have the m120 spring and I will buy any other parts needed to upgrade teh gun.
Re: VFC E series M16 upgrade
Posted:
Thu Nov 24, 2011 10:00 amby IconarmsDealer
Cylinder head seals,piston head o-ring? specifics! if you have it apart put a piston with metals gear strip. just to cover the extra spring
Re: VFC E series M16 upgrade
Posted:
Fri Dec 16, 2011 6:05 pmby Savage
I would advise against opening up your VFC if you have the choice. Stock, it will preform better than most upgraded guns. When I opened mine for some basic maintenance, the entire gearbox, as well as most of the external pieces simply fell apart. If it aint broke, don't fix it.
Re: VFC E series M16 upgrade
Posted:
Fri Dec 16, 2011 7:44 pmby THKInternational
Savage wrote:I would advise against opening up your VFC if you have the choice. Stock, it will preform better than most upgraded guns. When I opened mine for some basic maintenance, the entire gearbox, as well as most of the external pieces simply fell apart. If it aint broke, don't fix it.
t kinda is now the 9.6 I have wont turn the gearbox it could be the battery I have tried fiddling wit the motor
Re: VFC E series M16 upgrade
Posted:
Sat Dec 17, 2011 9:21 amby IconarmsDealer
Wont turn it...and its all stock?
Replace the motor if you have one...I have a new CA high torque $25.00 Removed from a new Gun. I would remove the gear box, and see if you can spin it manualy a full cycle- rule out an internal Jam!
Re: VFC E series M16 upgrade
Posted:
Sat Dec 17, 2011 7:53 pmby THKInternational
IconarmsDealer wrote:Wont turn it...and its all stock?
Replace the motor if you have one...I have a new CA high torque $25.00 Removed from a new Gun. I would remove the gear box, and see if you can spin it manualy a full cycle- rule out an internal Jam!
thats the thing tho after i charge the battery the gun will cycle but eventualy it will just say YOU SHALL NOT PASS!!!
Re: VFC E series M16 upgrade
Posted:
Sat Dec 17, 2011 8:26 pmby Exarach
THKInternational wrote:IconarmsDealer wrote:Wont turn it...and its all stock?
Replace the motor if you have one...I have a new CA high torque $25.00 Removed from a new Gun. I would remove the gear box, and see if you can spin it manualy a full cycle- rule out an internal Jam!
thats the thing tho after i charge the battery the gun will cycle but eventualy it will just say YOU SHALL NOT PASS!!!
Wait, you mean that like after use the battery will lose its charge.....
WHAAAAAAT?
Re: VFC E series M16 upgrade
Posted:
Sat Dec 17, 2011 11:23 pmby THKInternational
its instant 4-10 shots then it will stop
Re: VFC E series M16 upgrade
Posted:
Sun Dec 18, 2011 9:38 amby IconarmsDealer
Start witha brand new battery. Start simple...and cheap! Bring it over here and lets hook it up to a Lipo and see what happens
Re: VFC E series M16 upgrade
Posted:
Mon Dec 19, 2011 2:20 pmby Savage
I had the same issue, actually. Led to me opening it. Try using someone else's charger, and check your wires.