Re: VFC E series M16 upgrade
Posted: Tue Dec 20, 2011 12:55 pmthe chargers fine and the wires what ydo you mean the battries wires or the guns wires?
TucsonAirsoftCoalition.com
Tucson Airsoft Coalition and Community Forum
http://tucsonairsoftcoalition.com/forum/
VFC E series M16 upgrade
http://tucsonairsoftcoalition.com/forum/viewtopic.php?f=62&t=3407
Page 2 of 3
Posted: Tue Dec 20, 2011 12:55 pmRe: VFC E series M16 upgrade
Posted: Tue Dec 20, 2011 7:38 pmMy VFC did something that damaged my batteries, and caused my batteries to damage my charger.
Re: VFC E series M16 upgrade
Posted: Tue Dec 20, 2011 7:55 pmso are you saying I should buy a new battery AND charger?
Re: VFC E series M16 upgrade
Posted: Tue Dec 20, 2011 8:20 pmYou should get a multimeter and test all electrical connections for voltage and amperage.
Re: VFC E series M16 upgrade
Posted: Wed Dec 21, 2011 12:06 amWhere could I find this device you speak of?
Re: VFC E series M16 upgrade
Posted: Wed Dec 21, 2011 12:12 amTHKInternational wrote:Where could I find this device you speak of?
They are all over town. I got mine from Autozone but nicer ones(and more expensive) can be found at Lowes or Home Depot. However if you do not know how to use one properly they are kinda useless to have.
Re: VFC E series M16 upgrade
Posted: Wed Dec 21, 2011 6:40 amAs this sounds like a Trouble shooting question it should be moved.
(1) Before you spend $$$$ Charge you battery,install it in another AEG and see if it malfunction in the same way.
(2)Buy or Borrow a new Battery-Charge it!
(3)Check and or replace the fuse
(4)Inspect all Wire connectors Motor,Battery and so on.
(5)Inspect the wires for abrasions, and cuts where it may ground out against any metal.Replace or repair!
This should confirm, or rule out any electrical problems.
(1) Before you spend $$$$ Charge you battery,install it in another AEG and see if it malfunction in the same way.
(2)Buy or Borrow a new Battery-Charge it!
(3)Check and or replace the fuse
(4)Inspect all Wire connectors Motor,Battery and so on.
(5)Inspect the wires for abrasions, and cuts where it may ground out against any metal.Replace or repair!
This should confirm, or rule out any electrical problems.
Re: VFC E series M16 upgrade
Posted: Wed Dec 21, 2011 7:52 amand for your info simmons i could let you use my multimeter that i have if you need to
Re: VFC E series M16 upgrade
Posted: Wed Dec 21, 2011 11:05 pmIconarmsDealer wrote:As this sounds like a Trouble shooting question it should be moved.
(1) Before you spend $$$$ Charge you battery,install it in another AEG and see if it malfunction in the same way.
(2)Buy or Borrow a new Battery-Charge it!
(3)Check and or replace the fuse
(4)Inspect all Wire connectors Motor,Battery and so on.
(5)Inspect the wires for abrasions, and cuts where it may ground out against any metal.Replace or repair!
This should confirm, or rule out any electrical problems.
thanks Icon I'll try this out from step 2. McLAthErs, Imma have to steel that multimeter from you when I get a new battery xD
Re: VFC E series M16 upgrade
Posted: Thu Dec 22, 2011 5:44 pmTHKInternational wrote:IconarmsDealer wrote:As this sounds like a Trouble shooting question it should be moved.
(1) Before you spend $$$$ Charge you battery,install it in another AEG and see if it malfunction in the same way.
(2)Buy or Borrow a new Battery-Charge it!
(3)Check and or replace the fuse
(4)Inspect all Wire connectors Motor,Battery and so on.
(5)Inspect the wires for abrasions, and cuts where it may ground out against any metal.Replace or repair!
This should confirm, or rule out any electrical problems.
thanks Icon I'll try this out from step 2. McLAthErs, Imma have to steel that multimeter from you when I get a new battery xD
only jeff gets to call me mclathers and ok let me know when you get the battery