motor help!

[pizzapie1776]

what kind of short type motor would be good for a tsd g36. i have an m120 spring, and what are other things i might need? i have high speed gears

[david23717]

i know that G&P m120's are good for high speed. make sure you get the short type. i would reccommend a 100 spring if your going for high speed. if your going for a good balance get a 110.

[AZsharpshooter]

a Short high torque motor.

[cpt_wonton2]

buy the matrix 3000 high torque, it rapes systema and kwa at only $45 @evike. DO IT!!!!

[Riptoor]

buy the matrix 3000 high torque, it rapes systema and kwa at only $45 @evike. DO IT!!!!

LOL

[david23717]

i lolzed the G&P m120 is $40

[cpt_wonton2]

yeah thats true, but unless the guy is goina run li-poli, the motor wont be able to pull it easily. With the matrix, itll just run and run and run and then run some more pretty dang easily. im using a magnum long type with a 120 and li-poy and it shoots 28bps.

[AZsharpshooter]

yeah thats true, but unless the guy is goina run li-poli, the motor wont be able to pull it easily. With the matrix, itll just run and run and run and then run some more pretty dang easily. im using a magnum long type with a 120 and li-poy and it shoots 28bps.

Now imagine if you were using a Systema Magnum motor.

[wash warrior]

Hey what's up. I was giving suggestions earlier over text. I'm working on finding you some links, someone has already said G&P M120 which was going to be what I recommend. I have done a ton of motor research because I am going to run my M14 at 500fps so I had to, and G&P motors came up a lot. (If your curious, I ended up getting a Guarder Infinite Torque motor, but I am running a totally different set up, and would not recommend the same motor for your set up)

here's one guy who has help me a lot, and he talks about the G&P from personal expirience:

http://www.airsoftretreat.com/forums/in ... #msg774077

look for namloot's post, about halfway down.

ya i just looked, that's the only one that I can find right now. I think it is cheaper than the matrix one you were looking at.

And don't get systema magnum's. Read some threads on ASR about those. They perform AMAZINGLY, while they perform But countless people have had them destroy gearbox after gearbox, stripping pistons and gears. So if you are going for reliability, and don't want to spend $100 on a motor, don't get the new Systema's. The old ones are supposed to be very reliable though

[pizzapie1776]

thanks everyone... a high speed motor would be bad if i had high speed gears right?? and i already have an m120 spring and im going to use it. i was looking at the matrix magnum motor... any thoughts??

http://www.airsoftgi.com/product_info.p ... ts_id=3567