M249 Wire Set

[AZsharpshooter]

Does any one know were I would be able to get an M249 wire set that goes to the stock. I haven't been able to locate one as of thus far, so any held would be appreciatied.

[quadro]

You can just buy some low resistance wire and wire it to the back yourself.

[KileyHAZ]

You can just buy some low resistance wire and wire it to the back yourself.

+1, I have the mk2 gb if you wanna know the lead lengths...

[Boles]

I had the para stock and just did the wiring myself. I took some wire from radio shack and took the gearbox out. I also wired it to be able to hold two batteries. So now in my stock I have 2 10.8v batteries. It was pretty easy all you really need is some head shrink wire and a solder gun.

[AZsharpshooter]

Ok I haven't done any wiring myself but hey there's a always first time for everytime. A few quick questions, do I need a fuse? How do I wire the trigger switch? Well Im asking questions does the M249 GB use a Ver 2 Cylinder head, and how do you undo the wires from the Trigger switch. Thanks so much for the help guys.

[Savage]

I've never wired any guns, but you're probably going to need a soldering iron to get started. Melt the places where the wires connect to the boxes, remove and re-melt, then re place the wires.