EDIT: Solution found.
Just shove a small flathead screwdriver in the well, and wiggle it back and forth. after a few minutes of toying with it, I was able to unjam both of my mags.
Moderator: Moderators
Raptor wrote:First off, I ask that you bear with me in my Technical noob-dom, as I don't know many of the correct terms.
Anyway, I have the Magpul PTS midcaps, and I first noticed that they had BB's stuck inside, by hearing them roll around. Next, I noticed, that when empty, or close to it, the little nub that sits atop the spring, is NOT visible in the magazine. I'm guessing it got stuck/jammed.
Any suggestions/tips/ideas/fixes?
Maybe some info on how to disassemble this polymer nightmare?
thatoneguy92088 wrote:Raptor wrote:First off, I ask that you bear with me in my Technical noob-dom, as I don't know many of the correct terms.
Anyway, I have the Magpul PTS midcaps, and I first noticed that they had BB's stuck inside, by hearing them roll around. Next, I noticed, that when empty, or close to it, the little nub that sits atop the spring, is NOT visible in the magazine. I'm guessing it got stuck/jammed.
Any suggestions/tips/ideas/fixes?
Maybe some info on how to disassemble this polymer nightmare?
Smack them on a hard surface in order to hopefully clear the bb jam
Return to Maintenance and Troubleshooting
Users browsing this forum: No registered users and 1 guest